Bench status
This is the working log of a two-bench electronics lab in Ghent. Every board that reaches a bench gets a row here and, if it is in active bring-up, a page of its own. The five newest are written up in full; older ones stay as a line in the registry. Two people keep it: Ilse Vantorre and Pieter Maes.
LOGIN REQUIRED for write access and for the raw captures. The public log is read-only. Scope changes, netlists and the capture archive are on the bench terminal; see lab login.
Active bring-up
| # | board | rev | state | first power | outstanding |
|---|---|---|---|---|---|
| #19 | MB-9 Kestrel | rev C | [partial] | 2026-09-26 | high-speed serial port does not enumerate |
| #18 | ND-200 Sable | rev A2 | [up] | 2026-08-14 | (none) |
| #17 | TB-4 Ribbon | rev A | [blocked] | 2026-06-02 | 1V8 rail shorted by a layout error, waiting on rev B |
| #15 | PX-12 Harrow | rev B | [up] | 2026-03-19 | ADC reference drifts above 60 C |
| #14 | GL-80 Quarry | rev D | [up] | 2025-11-07 | (none) |
[up] every rail in band and the loader runs [partial] executes code with a named peripheral still out [blocked] cannot proceed without a new bare-board revision [archived] work stopped, board not in active bring-up
Recent entries
- 2026-09-26 MB-9 Kestrel rev C opened
- 2026-09-11 RIG-3 boot capture box rebuilt
- 2026-08-19 ND-200 Sable rev A2 closed
- 2026-08-14 ND-200 Sable rev A2 first power
- 2026-07-03 TB-4 Ribbon short localised
- 2026-06-18 Bring-up checklist revised